QuietKat-Tech
1 mW
- Joined
- Oct 3, 2018
- Messages
- 13
Hello everyone! I'm curious if anyone else has ran into this issue and / or has found a solution around it. The issue being that when the Bafang Ultra motors utilize a throttle; it seems that the throttle gives 100% regardless of the assist level. I am currently trying to get the motor to limit the throttle based on assist levels but have had zero luck. The update files Bafang sent me only limit the speed so the issue may be lost through translating the issue. I have also used the Besst and SZBAF programmers without luck. I have changed the throttle, speed and current % of the assist on SZBAF but get the same throttle input regardless of settings. Feel free to let me know if you have discovered a way to limit the throttle with the assist levels on the Ultra. Thank you for your time and help everyone!