Bigwheel
1 kW
I received both the baserunner and hub motor direct from Grin and they said that they were synced. I hooked it up to my battery and throttle and am not getting any throttle response although it is showing voltage gain on the CA to 100%? Any help appreciated!
Edit: This is what I am working with, no throttle out
![CA1.jpg CA1.jpg](https://endless-sphere.com/sphere/data/attachments/194/194985-5bbb0444699568b2c1e7320de9751885.jpg)
![CA2.jpg CA2.jpg](https://endless-sphere.com/sphere/data/attachments/194/194986-dd7ca0df4ed8168c3a7fd5e93e02827a.jpg)
It looks like the current a is too high from what I can see in the online manual but haven't hit on how to decrease it
This is what the screen out of setup mode looks like:
![CA3.jpg CA3.jpg](https://endless-sphere.com/sphere/data/attachments/194/194987-abec1a04101be72ea6045ff85ea38723.jpg)
The W as shown is very high also. I have the settings @ 20a/1200w in the proper place?
Edit: This is what I am working with, no throttle out
![CA1.jpg CA1.jpg](https://endless-sphere.com/sphere/data/attachments/194/194985-5bbb0444699568b2c1e7320de9751885.jpg)
![CA2.jpg CA2.jpg](https://endless-sphere.com/sphere/data/attachments/194/194986-dd7ca0df4ed8168c3a7fd5e93e02827a.jpg)
It looks like the current a is too high from what I can see in the online manual but haven't hit on how to decrease it
This is what the screen out of setup mode looks like:
![CA3.jpg CA3.jpg](https://endless-sphere.com/sphere/data/attachments/194/194987-abec1a04101be72ea6045ff85ea38723.jpg)
The W as shown is very high also. I have the settings @ 20a/1200w in the proper place?
Last edited: