Can I adjust the acceleration with the CA V3 ?

[Whitehawk]

Hi all,

I have a CA v3, with a Lyen 12 fet controler.

My throttle is very sensitive and too powerful when my bike is stopped or at low speed. (4.5kw with a GNG 650w)

So i would like to know if I can adjust the acceleration curve with the CA v3? If yes, the CA prog cable is required or not?

Thanks a lot !

 

[spisska]

Have a look at the users guide. There are adjustable settings for throttle ramping, but I'm pretty sure you'll need the programming cable to make the adjustments.

 

[TotalConfusion]

Yes you can and you can do it without the program cable, if you just go into the set up and scroll through it you will find it and you are able to change the Throttle ramping as you like.
I changed mine today while on a ride and pulled up and in about 30 seconds changed it from 2.5V per second to 2 volts per second to stop the front wheel from lifting when i took off from a standing start.
You can change the ramp up and the ramp down to what you like.