I own an EM3ev 52V 17.5 Ah battery, and was trying to power a new set of 10-60V front/rear lights for the bike.
I was planning to either a) Tap the current by soldering up a pair 12 gauge silicone wires into the existing 4mm bullet connectors by creating a 2" bullet connector "Y" adapter...or b) Utilize the battery's charging port to power the lights.
I am unsure whether the charging port, which obviously feeds into the BMS, can be utilized in this way.
Any advice would be appreciated.
I was planning to either a) Tap the current by soldering up a pair 12 gauge silicone wires into the existing 4mm bullet connectors by creating a 2" bullet connector "Y" adapter...or b) Utilize the battery's charging port to power the lights.
I am unsure whether the charging port, which obviously feeds into the BMS, can be utilized in this way.
Any advice would be appreciated.