Hey guys, New guy here! Just starting my first build- I came from the land of motorized bikes and wanted to do an electric bike instead..
Anyways, so my end goal is to have fun. I bought a cheapo motor off of eBay, seems they are of decent quality. Its going on my old Trek 7100.
The kit I purchased came with a 48V controller, as to use with the kit. It has the 9 pin set up, and a bunch of easy plug and play sort of connections. Now I only have a 72V battery, which I planned to overvolt this system anyways (if the motor goes, its for fun anyways! I want to see how overvolting works!!) however my problem are those connectors. I do have a 72V controller with the standard wires you usually see hanging from any universal controller. Does anyone know how these would go together? Meaning how I can swap out the ebikeling controller with my 72v controller? I'm not afraid to splice and soldier.. I just am not sure where to begin as the entire kit seems to have these pin connectors. Perhaps is there a way to cut the connectors from the ebikling controller and slap them onto the universal one? Sorry again I am new to this.
links below of the controllers (not sure how to add images just yet):
Ebikeling:
https://www.amazon.com/EBIKELING-Waterproof-Brushless-Controller-Electric/dp/B07XPDCXJM/ref=asc_df_B07XPDCXJM/?tag=hyprod-20&linkCode=df0&hvadid=416727384120&hvpos=&hvnetw=g&hvrand=12311088869390740723&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9018971&hvtargid=pla-872570713188&psc=1&tag=&ref=&adgrpid=95577039802&hvpone=&hvptwo=&hvadid=416727384120&hvpos=&hvnetw=g&hvrand=12311088869390740723&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9018971&hvtargid=pla-872570713188
Universal ebay controller:
https://www.ebay.com/itm/164116237960
Anyways, so my end goal is to have fun. I bought a cheapo motor off of eBay, seems they are of decent quality. Its going on my old Trek 7100.
The kit I purchased came with a 48V controller, as to use with the kit. It has the 9 pin set up, and a bunch of easy plug and play sort of connections. Now I only have a 72V battery, which I planned to overvolt this system anyways (if the motor goes, its for fun anyways! I want to see how overvolting works!!) however my problem are those connectors. I do have a 72V controller with the standard wires you usually see hanging from any universal controller. Does anyone know how these would go together? Meaning how I can swap out the ebikeling controller with my 72v controller? I'm not afraid to splice and soldier.. I just am not sure where to begin as the entire kit seems to have these pin connectors. Perhaps is there a way to cut the connectors from the ebikling controller and slap them onto the universal one? Sorry again I am new to this.
links below of the controllers (not sure how to add images just yet):
Ebikeling:
https://www.amazon.com/EBIKELING-Waterproof-Brushless-Controller-Electric/dp/B07XPDCXJM/ref=asc_df_B07XPDCXJM/?tag=hyprod-20&linkCode=df0&hvadid=416727384120&hvpos=&hvnetw=g&hvrand=12311088869390740723&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9018971&hvtargid=pla-872570713188&psc=1&tag=&ref=&adgrpid=95577039802&hvpone=&hvptwo=&hvadid=416727384120&hvpos=&hvnetw=g&hvrand=12311088869390740723&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9018971&hvtargid=pla-872570713188
Universal ebay controller:
https://www.ebay.com/itm/164116237960
