Erase 36v/48v controller memory?

Joined
May 8, 2023
Messages
9
Location
Fredensborg
Hi guys
So i got this 36v/48v kt controller hooked to a 500w bafang 48v hub.
When i run it at 48v its great.
But it stalls at 36v after a quarter turn.
My bms is rated for it, and i tried multiple batteries. It seems like the controller is thinking its a fully charged 36v and a real low 48v at the same time.
If you have a fix please let me know!
 
Hi guys
So i got this 36v/48v kt controller hooked to a 500w bafang 48v hub.
When i run it at 48v its great.
But it stalls at 36v after a quarter turn.
My bms is rated for it, and i tried multiple batteries. It seems like the controller is thinking its a fully charged 36v and a real low 48v at the same time.
If you have a fix please let me know!
Discharge the 36v battery until it’s below the 48v lvc (down closer to 36v) then connect it to the controller. It has no way of knowing it’s not a 48v battery if it’s within the operating range of a 48v battery.
 
Back
Top