ZeroEm
1 MW
I understand what you are asking now! Mechanically it's the bearings, the magnets are on the outside so should not bother them. Don't remember more than 1000 rpm on a DD. There is a better answer don't remember it now. It's about the motor not design to spin faster. Not that they can't, but not efficiently. Not to say something that heavy to get it spinning 1000's or rpms and then slow it down is another issue. I will look for the answer I think you want.
by Hummina Shadeeba » Oct 27 2021 7:31pm
I mean what is the max rpm the motor can mechanically take before flying apart.(what rpm would be electrically ideal is another question). And I think all the sellers I’ve asked are misunderstanding me too and bet the motor can do way more than 600rpm
It’s 638rpm as they advertise it with the 20” wheel so they surely aren’t answering the question and likely don’t know.
https://www.leafbike.com/products/diy-b ... -1185.html
((They told me they’ve tested it to 930rpm))