senlin said:
I drilled my extra holes exactly half way between the existing holes. Did not realize until after that I only had to drill every second gap.
understood, drilled extra holes exactly half way between the existing holes.
i think i read you got newest 212 hubs. These hubs are 2051kw8kg successor. Did you have some thread where you have info about them. From what i found... some time ago when they open line for manufacturing 212 people where sceptical about this new version 212 comparing them with predecesor 2051kw8kg. What can you say about its performance, weight ratio and power. I know all can be seen in graphs and digits but still, you actually have tested and use them so it's way better than performance graphs especially if you had them something to compare with.
senlin said:
As you will have read from other users, the fardriver controllers are powerful and work well, the app however is another story. Luckily there are members here that have figured out a lot of the parameters on the app etc. Definitely not so user friendly and quite a few values can not be changed.
*that's 100% precise.
My notices so far about far drive controllers in general, myself i got 96680.
*yesterday i read this thread and bits of other threads about far drive controller. Motor max temp value cant be changed (150/160celcius and fixed). Max volts (important to protection especially if regen is used) can be changed through nominal volts field. My apk is 2.1.7
*unofficial repository is somewhere in thread.
*aps manuals, now also in my repository if somebody needs will share.
*manual is disaster, half CN, half EN
*if you expect easy friendly app run run run away from it but if like wigle wigle then it's for you. Worse than sabvoton but way with more features, not so bad as Votol but not far from it.
*controller has no variable regen but has regular (throttle release and button pressed) regen initiation. Somebody complained that regen stop function at 10kmh not sure with what motor and at what rpm though, and it needs to be found by more sources.
*to pass motor test you have to keep throttle initiated and get throttle error and then you get OK for test pass (different than on ther controllers)
*BL dongle disconnects randomly
*where to see in apk what firmware version I have? Is there a point to update to newest if all works well.
*does different firmware versions ties somehow to different motor or it only changes few controller settings which can be changed by hand. I see my controller to be set for high rpm 4 pole motor. I changed poles but other settings left for high rpm motor. Auto setup does not change these settings.
*also read in this thread that apk has limited functioning time so it means that if current apk works for you it will till certain date.