Hi guys need a little help. Just installed a new 72150 and can not find the correct wiring for the regen. I have a thumb throttle which I would like to use for varible regen. I have already tried connecting the thumb throttle to the 3 wires you see cut in the pic and the throttle worked as a normal throttle along with my other normal throttle so I had 2 throttles and no regen. I believe it's something to do with a purple wire that I may need to connect to battery +. If you look at my pic you will see 2x 2 wire plugs with purple and black wires. I don't see any reference to these on there site so struggling what these are for. My sabvoton came with the ca plug and external shunt. Please see attached image I would be there great full if someone can help me out with wiring and software settings thankyou
The wires in the pic show what is left with everything else connected apart from the thump throttle
Ca v3
Sabvoton 72150 with ca plug
Mxus 3k
The wires in the pic show what is left with everything else connected apart from the thump throttle
Ca v3
Sabvoton 72150 with ca plug
Mxus 3k