hey all. so my girlfriend's bike has a 42v, 2.0a charger but i plugged my housemates's 58.8v, 3a charger in by mistake.
the battery is labeled 36v, 2.35a max charging current.
the 58.8v charger was plugged in for about 5min before i realized my mistake
what is the likely outcome of this? is it likely that i have fried the BMS? i can't see any failed/burnt components or broken fuses on inspection of the BMS (KLH3688)
since pluging in the wrong charger, the battery does not charge from the original charger (the light on the original charger does not change from green to red)
i have tried to perform a BMS reset (both internal and external)
the battery still powers the bike, battery level indicator still lights up etc, but just doesn't charge
i'm starting to wonder if maybe the plugging the wrong charger in for 5 minutes didn't cause the problem and the original charger failed seperately - i dont get any voltage reading from the original charger (should i get a reading when the light's green? or only when it's red?)
the battery is labeled 36v, 2.35a max charging current.
the 58.8v charger was plugged in for about 5min before i realized my mistake
what is the likely outcome of this? is it likely that i have fried the BMS? i can't see any failed/burnt components or broken fuses on inspection of the BMS (KLH3688)
since pluging in the wrong charger, the battery does not charge from the original charger (the light on the original charger does not change from green to red)
i have tried to perform a BMS reset (both internal and external)
the battery still powers the bike, battery level indicator still lights up etc, but just doesn't charge
i'm starting to wonder if maybe the plugging the wrong charger in for 5 minutes didn't cause the problem and the original charger failed seperately - i dont get any voltage reading from the original charger (should i get a reading when the light's green? or only when it's red?)