I convert my bike from das-kit to KT controller. I know the three phase large wires are ok. if i spin the wheel i get speed but no throttle respone at all. I i spin the wheel in reverse then press throttle it will spin forward and cut what should i look next?
T1000 KT controller retrofit need your help.
- Thread starter pr0cess0r
- Start date
exactly its the order of those small 3 wires that i need to figure... i tryed to read hal with a meter it work but i dont see 6 possibily in the order they should be... since its geared and i rotate it back to movethe hall should it be reversed order? i was thinking of using led to seed hall sensor to make it easy ...
Testing BLDC motor's Phase Wiring - Hall Sensors and Wiring. - Electricbike.com Ebike Forum
Testing electrical components of a typical hub motor with a digital multi meter. First take a few minuets and look over the wiring going into the motor for cuts, scrapes, missing insulation and other wiring issues or poor connections that should be resolved first. Smell for evidence of...
electricbike.com
Similar threads
- Question