Dude! This is the mostbad-ass RC mountain bike in the history of Endless-Sphere I love it
The modular bolt-on design is very effective and easy to remove should you want to actually pedal the bike.
What is your top speed and mileage?
How do you charge your battery pack?
What bike is it? What components? (fork, shifters, etc.)
Please kind sir, make us some more videos!!! Perhaps uphill runs, and top speed etc?
hi
mileage and top speed? not tested yet i think milage 25 km top speed 70km with 50v 12s lipos
here some spec for the bike http://www.canyon.com/_en/mountainbikes/specs.html?b=1770
to charge i use the charger Pulsar 2+ http://www.pp-rc.de/SHOP/epulsar2.htm
also
i hope i can explain the problem in english(is somewhere here in the forum that can make a traduction from french to english or german to english
i have tested 2 turnigy controllers once the TURNIGY K-Force 120A-HV OPTO and the Turnigy Monster-2000 200A 4-12S
the first controller i must say it work fine but it has the same probleme as the tunigy monster there is no possibility to regulate the controller ,i have the programming card but only 2 or tree thinks you can regulate no throotle regulation and the turnigy monster it's impossible to regulate the power always to much it flip me over 3 times to dangerous
i have tried to settle the power with the throotliser but after I reduced the ampere to 200amp the engine has begun to stutter, jerk. when I accelerate and i leave the power down for -+0.20 seconds the engine continue to climb.I do not want to kill me :?
for that the castle creation controller are really cool you program the throotle the pwm and the power and it runs :wink:
Nice setup, I really like how you mounted the motors and bypassed the cranks using a left side freewheel. Integrating the batteries was also very cool, but watch your knees when you pedal, with that much power. I doubt if you want to
I have to say, that is the best mt. Bike on the forum so far, maybe not the prettiest, but by far the best execution with all the best bits. Good job man!! You need to report on the performance, what you are happy with, what you would change, and what will break first. Isolation of the motor drive system with lots of power is the best way to go in my opinion. With Fox shocks all around, I bet that thing is PLUSH!!
That's so freaking awesome! yep pretty much second that!! I don't think that I have seen an e-bike with that kind of power, even the Etek monsters of the past didnt react like that, prob due to all of the lead on them :lol:
Really great job on the build, I hope it all stays in 1 piece and you do as well!! be careful..great power great responsibility and all that, more video please please please.....Matt you do make some amazing stuff!! what with that and the lipo packs e-bikes are really going to be amazing, we all just got to make sure we all fly under the radar when using them on the road though keep the peddles on all the builds and make sure you have a switch on the handle bars to cut the available power maybe?
Anyways great great great job ***** MORE VIDEO PLEASE ******
brave new world Knoxie :lol: now see what i mean about you may as well get some rc kit too?
Amazing that just 4 years ago point one were the packs eh? lol, and to think of the size of the controllers!!! i think it's fair to say that Matt (amongst others) really gave our hobby a shot in the arm, the futures bright!!
go on you know you want a full susser