I have a 6 wire throttle on my ebike and wanted to have a backup 6 wire throttle for it on hand just in case of accidental breakage. The manufacturer doesn't sell replacement throttles, so I ordered a generic 6 wire throttle from amazon. It operates the bike correctly, but something in the new throttle is drawing down the battery on top of the energy expended by the hub motor. I'm only getting about 60% of the usual range on a charge, and even just while parked there is evidence of a load on the battery that is discharging it, as seen in the LED display. I have checked the wiring carefully and I don't believe there is any mismatch on the 6 different wires between the original and generic throttles. Any other thoughts appreciated!