Renouvelle
10 µW
- Joined
- May 11, 2022
- Messages
- 6
Hello! first post - long time lurker.
I’m running a KLS 45H from kelly controller with a QS 272 6000w Wheel motor and I’m having issues with smoothness or lack thereof. No matter what parameters I use it has an aggressive deceleration/jerking when letting off the throttle. If I slowly depress the pedal it does alleviate some of the harshness. I’ve sought guidance from Kelly controller’s engineers to no avail.
I have tried combinations of controllers, throttles (all 5v), and motors (272 and 205), yielding the same results. So i’m left with the issue isolated to programming.
I can get screenshots of the PID parameters etc when I’m back at my workshop later today. Hopefully someone here can shed some light.
For backstory I used Lyen controllers with great success on the exact same setup, smooth as butter, problem is that guy wont return sales emails.
Thank you in advance for any and all constructive feedback!
I’m running a KLS 45H from kelly controller with a QS 272 6000w Wheel motor and I’m having issues with smoothness or lack thereof. No matter what parameters I use it has an aggressive deceleration/jerking when letting off the throttle. If I slowly depress the pedal it does alleviate some of the harshness. I’ve sought guidance from Kelly controller’s engineers to no avail.
I have tried combinations of controllers, throttles (all 5v), and motors (272 and 205), yielding the same results. So i’m left with the issue isolated to programming.
I can get screenshots of the PID parameters etc when I’m back at my workshop later today. Hopefully someone here can shed some light.
For backstory I used Lyen controllers with great success on the exact same setup, smooth as butter, problem is that guy wont return sales emails.
Thank you in advance for any and all constructive feedback!