Recent content by efreak

the same sort of problem i am having in this thread http://endless-sphere.com/forums/viewtopic.php?f=14&t=31251 Is there any voltage detected on the charging poles for the battery? from bms? any fuses that maybe blown or any signs of any component burnt out? still waiting for the correct...

on page 7 this is by far the best design i have seen yet for interchangeable cylindrical battery pack construction period. can't seem to find any weak points, none.

You also need to add your own $2 rim tape . is it does not come with and it punctured the inner tube from inside after the first couple of rides the motor that looks similar to magic pie but different ( it has silver rings instead of the star look) is made by conhis motor China

maybe but only i pole very much like an rcs with the long end nipped

there is no voltage on the wires leading to the female rca on the pack zero,

i have take better pics part number ME7580C H040

it would be sticking out of the pack though! i should really. the male rcs thingy (it is like an rca) has a short inner part so as not to short but i do agree it is a cheap way to go and they are like or pro electronic left overs good for nothing and still good for nothing i guess a little...

Thanks a lot there is no fuse on this one then i am not sure if the charger is 2 or 3 amps i remember reading the 48 volt pack came with the 3 amp . but no small fuse on the charging end i am looking for the pics and the small 3/8" mount its like an rca with a fat back very hard to find any...

Thanks a lot Y! You may be able to help me with my silver pack that i purchased on ebay. 48 volt 10 ah as it is mention in the thread, http://endless-sphere.com/forums/viewtopic.php?f=14&t=31251 the pack hit the work bench that caused a small push on the plastic where the charging rca 3/8"...

I first like to knowledge great work by Leamcorp for this topic. The final product is amazing! 8) {many thanks to others as well for their contribution on this forum} the best design yet for no hassle, no soldering, no fuss packs that are easy to fixlater and i would be interested in...

Thanks I read the announcements after . The upcoming wiki feature sounds great it should cut down on search times. Thanks to Justin and Mr Vass

That could be the problem i would suggest a bigger amp anderson connector http://www.connex-electronics.com/?url=/html/products/anderson/anderson_main_select.html?gclid=CNyvosPX_aoCFc_AKgodGQnLTQ

too bad the pictures are not available neither here or the Vpower thread.

I did disconnect the small rca that I had attached to do some more testing there is no voltage (Zero) detected between the yellow positive that goes to bms (charging leads) and the green that goes to bms as my good friend mentioned if the charger is to detect some voltage to begin charging...

it was the charging ends on the battery not the output end that shorted . the rca connector, is it an isolated connector? I wonder i replaced with a regular rca an only green light on the chrger comes on when connected to the battery pack looks like an old antenna connector . may be this...