Search results

Date Relevance Most replies

  1. N

    Brose 90nm or 50nm?

    All good. 2016 evo-e-stream FS3 w/ BROSE is 17.5 aH and 90nM. same torque as he Specialized Levo and more battery.
  2. N

    Easy Motion Neo Jumper 650B

    Purchased from where?? Nice bikes with the new 12aH batteries, vs. the old 9aH.
  3. N

    Torque Arms? Saddle bags?

    http://www.endless-sphere.com/forums/posting.php?mode=quote&f=3&p=254886 My dropouts before and after double torque arms. Pics.
  4. N

    Rear Dropout Torque Arms for DH frame?

    I just mounted my rear wheel with the torque arm inside the frame on one side, due to lots of wear on the softer aluminum dropout from the "narrow shouldered" axle. That is the weak link of the BMC mounting surface, and needs to be addressed, with a very strong knurled washer to grip the inner...
  5. N

    GoldenMotor Magic Pie.

    I had to step in: What we really need for the future is: Pie in the Sky A flying e-bike.
  6. N

    whats best setup for performance hillclimbing mtn bike ?

    CLyte motors are heavy. You will be very surprised with the torque and hill ability of the geared 9lb. BMC 600 v2 at 36v ( or 48). IT does 24mph at 36v and takes off. That should be enough for most......and the range you get by keeping the battery weight and motor weight - and price - down...
  7. N

    Paralleling batteries of different Ah?

    IS there anyone in the States who can build me a diode harness with heat sink / 10 ga. with 45 amp Andersons for my 15ah ping and Bosch 6ah packs?
  8. N

    Dahon Matrix folding MTB - X5304 - stock Makita LiMn packs

    I have a mounting method in the triangle I'm working on for my new Ping 36/15. It is just big enough. My current Bosch torpedo balances the bike perfectly with my rear BMC. CLyte motor and battery on back is really not doing this bike justice. It rides very well when you distribute the weight.
  9. N

    Show Us Your Homemade Battery Housing

    http://www.americanplasticscorp.com/index.html "Public Invited" Right near me. My next project will be an ABS box in the triangle to hold the Ping 36v/15AH 2.5 battery and controller.
  10. N

    Kona Kahuna build - 1000 mile review

    I'm psyched. American Plastics Corp. is 12 miles from me!! http://www.americanplasticscorp.com/index.html I'm going to get some ABS sheet and try your method. They will even cut while you wait.
  11. N

    What are good components for high-speed e-bikes?

    This is like what I have wished for recently. Can you make the CA switch between 2 “speeds” in the form of 2 AMP LIMIT settings? That seems like the best way to conserve power. I love that I can limit amps when cruising the flats to about 13 amps to maximize range/battery life, but...
  12. N

    Show Us Your Homemade Battery Housing

    Great ideas here. Just posted, with many pics. http://www.endless-sphere.com/forums/viewtopic.php?f=14&t=13037&p=193145#p193145 Bosch "Torpedo" Fatpacks. Very easy to build. Modular packs. No mention of birch ply for contours. You can get this very strong wood in thin sheets ( 1/8", 3/16"...
  13. N

    Bosch Fatpack TORPEDO pics

    The charging is a bit funny. I used 5.9 Ah / 15 miles with a few long hills and lots of pedaling on my first ride to 32.5 LV and still going but slow. Then came in for its first charge which I baby sat in the garage. After about 45 min. the charger got warm, the fan and red light came on and...
  14. N

    Bosch 36V fatpacks opened up

    The "Torpedo" has been unveiled! Length DOES matter. http://www.endless-sphere.com/forums/viewtopic.php?f=14&t=13037 Plenty of pics there.
  15. N

    Bosch Fatpack TORPEDO pics

    Here they are, my patent pending DIY Torpedo Fatpacks: easily made in modules of 2,3 (mine is 18 "long) or 4 (24"). Dis assembly of the packs is so easy with a power screwdriver and a torx bit. No cutting of the plastic packs is needed. Careful to tape the wire ends so as not to touch...
  16. N

    Bosch Fat packs, Headway, or A123 pack for 36v BMC bike?

    OK Headway 36/ 10 Ah gone, it cut out on start up so the BMS was not set to 40 amps continuous, as ordered. I sent it back for refund, now, 3 Bosch fatpacks just in. Great headroom! Totally fun, fast ride. Next is range. I will probably get a Ping 36 / 15Ah with custom 40 amps continuous BMS...
  17. N

    Bosch 36V fatpacks opened up

    Success, and 1st charging weirdness. I stripped the loose end caps and trim off the packs and mounted them in a simple, white pvc gutter " tube" from home depot. I cut it and expanded it so they slide right in. Then is straps in the triangle to the lower tube. I hearby copywrite it, "The...
  18. N

    Bosch 36V fatpacks opened up

    OK, Green light went solid. Just measured all packs. Pack 3 (not connected to middle plug, but paralleled to the others) is 39.1. The one I had the middle plug into is 40.1. Not a huge difference, maybe but I think I need to connect all the middle plugs for even charging.
  19. N

    Bosch 36V fatpacks opened up

    Looking forward to a review of this combo........
  20. N

    Bosch 36V fatpacks opened up

    Sounds nice. DO you have pics?
  21. N

    My Build - 20" Folding Monster!!!

    This problem happened to me. Headway 36v / 10 Ah pack cut out on startup.....constantly. Supposedly it has a 20amp cont. rating BMS..( and I had special ordered it with 40 amps continuous BMS, but China, or somebody, didn't get the memo)........I had to set the Amp limit on my CA to 14amps and...
  22. N

    Fork Recommendation for Dahon Matrix 26"

    I Have the new 2009 model. the folding is a bit tighter and the triangle has "room" ....just enough for the ping 36/15Ah Battery.
  23. N

    Fork Recommendation for Dahon Matrix 26"

    Looking to upgrade my stock front fork. Nothing too esoteric or expensive. $100-200 range. Is this possible? Can you suggest something that will handle rocky trails nicely? Ebay seems to have lots of guys selling forks after their own upgrade. I don't want to risk a blown fork, but maybe I can...
  24. N

    Dewalt A123 BMS battery interface solution

    Yeah, but at $50 each!!!??? Bosch are much more attractive for multi setups.
  25. N

    FYI: Custom Aluminum battery boxes

    FYI, I found this site thru ebay for custom boxes. Reasonable prices. I may become a customer. http://www.customaluminumboxes.com/id72.html Not a sales pitch.
Back
Top