Recent content by leo99

As runforthehills said play a bit with the simulator to get an idea of what you want or need. Just keep in mind that ebike motors are usually run between 36volts and 72 volts. For the same motor if you use 72 volts it will go twice as fast as 36volt because the speed of the motor depends of the...

Hi, I ended up selling the bike even if it was a lot of fun. I will be building a new single speed road bike that is legal in my country so that means 25kmh limit and PAS only

Hi, I don't seem to see why changing the the wheel size would change the problem since even if you change the wheel size the seat will stay at the same height compared to the top pedals since the distance between the seat and the pedals will stay the same. Your whole bike will be lower but the...

Normally the controller has a red and black cable for - and + The cable in the picture is the phase cable normaly like amberwolf said. Could you take a picture of where that cable comes from ? Good luck Leo

You do not need the freewheel type 7sp and dpn extractor tool since you use a cassette that you can buy at decathlon. It's very easy to put a 26 inch wheel at the place of the 27.5 but then the front of the bike will be higher and you will have slightly less clearance with your pedals just so...

Hi, I think the hub option is much better suited to your situation. just go with the motor with cassette, it's much better. freewheel have a tendency to break. they finally have a cassette option, I think it would be a mistake to not take it. The dx32 rims are supposed to be bombproof so it...

Hi guys, I know it has been a while. I haven't been riding much but here is what it looks like now. I have been hitting 40kmh when pedaling with a fresh battery :D I have changed the front chainring since that picture and replaced it by a 48 tooth since I was going faster then expected...

Why would you want to swap freehub? I don't think that is possible Don't you mean cassette? Leo

It's hard to describe but it's slightly growly in the beginning and at full speed it's very s high pitched but less loud and when you are riding it The bike makes more noise itself then the motor when at max speed on flat. I also so had to swap the phase wire not only the sensors. There is a...

Hi Kevin, I am running the infenion controller on a Q100 cst 201 at 52v and 15 amps. Fully charged I hit 22mph without pedaling with a 26 inch wheel. Either you didn't wire it properly, or you are not running enough amps. My controller colors were completely mixed up with my motor when I found...

You have a good point there :D Well I am happy with my purchase and the garantie of em3ev if anything goes wrong but maybe next time I will go a different way. :wink:

The axle of the Q100 is a 12mm that has the sides cut to 10mm to not turn in the dropouts so it will fit in your fork

I think it makes sense if you don't want any screen and since I run it at lower values I can hid it in a bag without any fear of overheating. Leo

Hi guys, This is what the bike looks like at the moment. I just strapped the battery and the controller in the bag. I am loving it :D I am getting 36km/h without pedalling when the 14s battery is fully charged and I get 40km/h when pedalling. It climbs well it I come up the Hill with some...

Il dit que la vitesse en monter sera sûrement trop rapide pour des chemins de montagne avec un trike In English : he is saying that it would go up the hill to fast for a trike on a mountain trail. Leo