Recent content by TotalConfusion

2.4Kw peak and around 1.6Kw continous. The hub is a Crystalyte 4080 running a 14s battery for around 52 volts and a 40 amp controller. The guy I'm building it for shouldn't be aloud to much more power than that I think as his a bit accident prone.

Very nice and clean looking bike, I like the colours myself. I'm currently doing a Anthem atm and was wondering which way you went with your dropouts, are they Dr bass torque plates you have their or did you go another direction as im trying to keep a 7 speed on it if possible. My other option...

Just by going to a higher voltage will help your acceleration, why not go 18s and grab yourself a controller that can handle it, you can get yourself a cheap greentime controller or buy yourself a grin controller that can do 36 to 90 volts at 40 amps. You have the option of a Lyen 12 fet 45amp...

Noseless ? Please explain or is it just a seat without the nose on it like a lot or recumbent bikes use.

More speed maybe? A 20s pack of these will give you 87 Volts hot of the charger instead of 84 volts, So if you and your mate have the same type of motor and controller you will get a little more speed than your mate. Great to account for voltage sag maybe?

On 22s 92 volts hot of the charger your bike will be doing 110kph or 65 mph and will overheat in 7.3 minutes, Have you thought about running a Mxus 4T or 5T as this motor will hold up a little better and will run for ever at 80kph or 50mph in a 5T and a 4T will overheat in 33 minutes at 100kph...

Im currently only running a 40 Amp Grin controller but for my 5T im looking at the Adaptto mini e or a 60 amp controller from Russia as i need a small form factor for my current bike to fit but i intend on putting the 5T into either a Flux frame or a Vector as you can fit 40Ah into the Vector at...

Without Torque Arms that STEEL axle will just chew out your 10mm thick Aluminium dropouts and spin freely in the dropouts ripping your phase and hall wires to bits. I see you got Sams other 5T, Im planning to run mine on 21s 18650 cells and 20s Multistars if i cant find a good 100 volt...

They are for sale in Australia in 6s & 4s so you can make 14s with two 4s packs and a 6s pack aswell as 20s or 22s and so on.

What if they removed the man and replaced half his weight in Batteries for extended flying, mount a wifi camera to stream back to an operator as he flys over the beach looking for man eating sharks.

Ive got myself a 5T and im putting it in a 18 inch Moto rim and i have the 18 x 2.75 tire already and sitting it next to my 24 inch Hookworm the 18" is almost exactly 1 inch smaller than the 24" hookworm, I went a 18 because its quite Hilly where i ride, not mountains but small steep 2 to 300...

Sorry to hear about your problems, Ive been running a set of those 710 for a year now and have put on 10,000km on mine with not a problem in the world from them at all. In the Ten thousand km's ive put on them ive had to change the rear pads 3 times already as i have not been hard on them but at...

Ive been using a Magura throttle now for the past 12 months and have a little over 10,000km's on it with no troubles at all, It has been riden in extreme rain as i went for a ride in 100kph+ wind and rain during a cyclone with nothing to go wrong at all. Ive used a Thumb throttle before on a...

Anyone have any ideas on what could be causing this please as my CAV3 is still showing 0.5 Volts extra on the display than what the battery is actually at.

I got this quote yesterday for 130 Cells Hi Wayne, Thank you for you inquiry! Price for 130pcs Sasmung 18650 3000mah battery is USD3.68/pc, it is a high drain Samsung battery, have 15A discharge current. In stock now, can make delivery immediately, may i know is it ship to Australia? May be...