Search results

Date Relevance Most replies

  1. T

    Giant Anthem X3 with Adaptto

    2.4Kw peak and around 1.6Kw continous. The hub is a Crystalyte 4080 running a 14s battery for around 52 volts and a 40 amp controller. The guy I'm building it for shouldn't be aloud to much more power than that I think as his a bit accident prone.
  2. T

    Giant Anthem X3 with Adaptto

    Very nice and clean looking bike, I like the colours myself. I'm currently doing a Anthem atm and was wondering which way you went with your dropouts, are they Dr bass torque plates you have their or did you go another direction as im trying to keep a 7 speed on it if possible. My other option...
  3. T

    Why tesla with DD motor has massive torque and we need gear?

    Just by going to a higher voltage will help your acceleration, why not go 18s and grab yourself a controller that can handle it, you can get yourself a cheap greentime controller or buy yourself a grin controller that can do 36 to 90 volts at 40 amps. You have the option of a Lyen 12 fet 45amp...
  4. T

    $50 Louis Garneau bike shorts vs comfort suspension upgrade

    Noseless ? Please explain or is it just a seat without the nose on it like a lot or recumbent bikes use.
  5. T

    LiHV

    More speed maybe? A 20s pack of these will give you 87 Volts hot of the charger instead of 84 volts, So if you and your mate have the same type of motor and controller you will get a little more speed than your mate. Great to account for voltage sag maybe?
  6. T

    4kW Vector Frame build

    On 22s 92 volts hot of the charger your bike will be doing 110kph or 65 mph and will overheat in 7.3 minutes, Have you thought about running a Mxus 4T or 5T as this motor will hold up a little better and will run for ever at 80kph or 50mph in a 5T and a 4T will overheat in 33 minutes at 100kph...
  7. T

    MXUS 5T - 4 Banger Build

    Im currently only running a 40 Amp Grin controller but for my 5T im looking at the Adaptto mini e or a 60 amp controller from Russia as i need a small form factor for my current bike to fit but i intend on putting the 5T into either a Flux frame or a Vector as you can fit 40Ah into the Vector at...
  8. T

    MXUS 5T - 4 Banger Build

    Without Torque Arms that STEEL axle will just chew out your 10mm thick Aluminium dropouts and spin freely in the dropouts ripping your phase and hall wires to bits. I see you got Sams other 5T, Im planning to run mine on 21s 18650 cells and 20s Multistars if i cant find a good 100 volt...
  9. T

    Wowza 20Ah Multistar 6s !

    They are for sale in Australia in 6s & 4s so you can make 14s with two 4s packs and a 6s pack aswell as 20s or 22s and so on.
  10. T

    World Record Hoverboard Flight

    What if they removed the man and replaced half his weight in Batteries for extended flying, mount a wifi camera to stream back to an operator as he flys over the beach looking for man eating sharks.
  11. T

    MXUS 3000 sweet spot ? For off-road

    Ive got myself a 5T and im putting it in a 18 inch Moto rim and i have the 18 x 2.75 tire already and sitting it next to my 24 inch Hookworm the 18" is almost exactly 1 inch smaller than the 24" hookworm, I went a 18 because its quite Hilly where i ride, not mountains but small steep 2 to 300...
  12. T

    Tektro HD-E710 - my review.

    Sorry to hear about your problems, Ive been running a set of those 710 for a year now and have put on 10,000km on mine with not a problem in the world from them at all. In the Ten thousand km's ive put on them ive had to change the rear pads 3 times already as i have not been hard on them but at...
  13. T

    Throttle; Twist, thumb, half grip or custom?[Solved]

    Ive been using a Magura throttle now for the past 12 months and have a little over 10,000km's on it with no troubles at all, It has been riden in extreme rain as i went for a ride in 100kph+ wind and rain during a cyclone with nothing to go wrong at all. Ive used a Thumb throttle before on a...
  14. T

    Cycle Analyst V3 preview and first beta release

    Anyone have any ideas on what could be causing this please as my CAV3 is still showing 0.5 Volts extra on the display than what the battery is actually at.
  15. T

    Samsung 30Q INR18650-30Q 3000mah 15a cell

    I got this quote yesterday for 130 Cells Hi Wayne, Thank you for you inquiry! Price for 130pcs Sasmung 18650 3000mah battery is USD3.68/pc, it is a high drain Samsung battery, have 15A discharge current. In stock now, can make delivery immediately, may i know is it ship to Australia? May be...
  16. T

    Cycle Analyst V3 preview and first beta release

    Its not a Fluke but its German made and batteries are good in it. when the CA is showing 88.7 volts on the display after charging to 100% if i stick the multimeter probes into the CA's Output Power Jack my multimeter reads 88.2Volts where as the Display is showing 88.7Volts, Check battery and...
  17. T

    Cycle Analyst V3 preview and first beta release

    Hi All, I have a CA problem i believe and tried to skip over most of the pages but couldn't find anything on it But Tek mentioning a few post ago about 4.5 Calibrate Current and Voltage which caught my eye. My Problem is an incorrect voltage display on my CA .... In Short..... I did a battery...
  18. T

    Frame for 171kg guy...

    The Vector comes with the option of a dual rear shock which would suit your friend well.
  19. T

    EV sonic 7 kit car

    That is one very nice looking machine Kiwi, Ive noticed you said 46 batteries in series and they are 180 amp. Can you enlighten us a little more on the Motor Specs and controller, I think you said regen was pumping 1100amps back into the battery and that just amazes me. Also on another note...
  20. T

    Cheap Ebike Kit

    Take a look at this site also as they sell batteries with Samsung and Panasonic Cells in their Pack for a decent price but they are in Europe and all the batteries ship from China. http://www.hallomotor.com/e-bike-ev-lithium-battery/samsung-cell-battery
  21. T

    EV sonic 7 kit car

    Thats very nice indeed, I like the Ski tube testing ground, lol Very nicely made Kiwi
  22. T

    48V battery for an electric outboard motor?

    For 24 to 48 Volt System, Series with Permanent Magnet Motor. Controller set to 0-5K throttle unless you request differently. This package includes: Motenergy ME0708 Motor, 4.8 KW continuous and 15 KW for 1 minute Your choice of controllers: Alltrax AXE4844, SPM-48300 at 300 amps or SPM-48400...
  23. T

    E max Silcon batteries

    http://www.ebikes.ca/shop/ebike-parts/cycle-analysts.html
  24. T

    welding 18650 cells with DN-5 spot welder

    Yes there is a difference, DO NOT just pick a side and wire it up, If memory serves me right as i have been out of the business for 5 yrs now but the left hand side is the positive on the GPO on the wall. So when you look at the plug front on, its the prong on the right hand side. Your plug...
  25. T

    Large capacity frame battery for 48V?

    Take a look at this site in europe as they sell many types of batteries http://www.hallomotor.com/2015-latest-48v-20-3ah-samsung-cell-inr18650-29e-seat-tube-li-ion-battery-with-slim-aluminium-case-charger-and-bms.html
Back
Top