Search results

Date Relevance Most replies

  1. G

    72v on a 60v scooter

    I’m thinking if hooking up a 72v battery on my 60v scooter. I am about to open up my scooter to verify I have capacitors in the controller that can handle 100v. I have one of those Nanrobot rs-7 scooter clones and I’ve taken it to 55 mph gps verified. I want to get a little bit more speed out...
  2. G

    Ly hub motor

    I'm looking to buy an 8000watt scooter with these hub motors. Does anyone know anything about these motors?
  3. G

    e300 overvoltage kit

    Very nice! I wished i had seen this. I bought a new 36v 1000w controller from amazon and a 500w motor from fast scooter. Could have saved some money as it us just a motor from an iZip rebadged.
  4. G

    1000w controller on a 250w motor

    Thanks for your reply!
  5. G

    1000w controller on a 250w motor

    I’m upgrading my scooter in pieces one at a time. I want to upgrade the controller first and step up to a 1000w. I figure it should be ok for the motor. But what if I step up the voltage (from 24 to 36) and wattage (1000w). It will be hard on the motor but I should be ok right? Thanks, Gary
  6. G

    e300 overvoltage kit

    I just picked up a pristine Razor e300 (version 41). It was owned by a woman who rarely rode it and looks brand new. I'm not going to go all out. I'm going to overvolt this with two ryobi 18v 9ah batteries at 36volt connected in series. I also will be buying the 36 overvolt kit from fast...
  7. G

    Using a lead acid charger to charge a LifePo4 Ping battery

    No, only 1 led lit up. I need to find my original charger.. I know it's bad, just haven't had time to charge it. BTW, I did try to find old threads talking about this as I have seen it before, but I admit I didn't try to hard. Gary
  8. G

    Using a lead acid charger to charge a LifePo4 Ping battery

    I just moved and lost my charger for my ping battery. Today I decided to take my ezip 24 volt battery charger that I use to charge my ezip TrailZ and my e750 scooter and use it to charge my ping 24V LifePo4 Battery. The connector fit and it seems to charge without a problem. I haven't charged...
  9. G

    Any brushed motor controller recomendations? (Upgrading it)

    I bought my ezip 750 about a week ago and love it. It will complement my ezip Trailz bikes that I have for my wife and myself. Even uses the same charger. I also bought a 1000 watt scotter from east coast scooters. I will compare the two and if the 1000 watt one is indeed better, I will...
  10. G

    Ping 48V15Ah WTF

    Yes, I would love to see pics. I hooked up the escape pod today. Took some pics and will post it soon. It's a nice unit, but after I installed it, it's slightly warped since the way I installed it was probably non conventional. I'd like to see (or hear) how you look up the escape pod...
  11. G

    Ping 48V15Ah WTF

    Why do you want to change the XLR plug to anderson's? Trying to understand the reasoning. I bought anderson's because i need to connect the battery to the bike. I just picked up my escape hatch today. Here are some pics I just took.
  12. G

    Ping 48V15Ah WTF

    thanks dogman. The wires on the currie electrical spring block is only 14 or 16 guage. I think I'll go to home depot or lowes to pick up a few feet of wires which should cost me less than 3-4 bucks rather than buying an entire roll for $10. Gary
  13. G

    Ping 48V15Ah WTF

    Quick question: What gauge is the wire largest black and red wiring coming from the battery? I need to buy some wires and want to match up the gauge of the wire. Any cheap place to buy wires? I think walmart has a roll of heavy gauge wires for about $5 spool in their auto section. So it'll be...
  14. G

    Ping 48V15Ah WTF

    I'm looking what consist of a "set". What is the "roll pin" for? Thanks, Gary
  15. G

    Ping 48V15Ah WTF

    If I had not ordered, I would have gone this route. Those are damn good prices. Well, since anderson connectors are proven, I'm happy I paid $3/connector w/ pins rather than $9 w/pins at Graingers. There is no way I'm gonna pay $20 to get two wires to connect. That's just silly or I'm just...
  16. G

    Ping 48V15Ah WTF

    All my leds are off now, after over 24 hrs. I measured the voltage tonight - 48 hrs after charging and it shows 28.6 volts on a 24volt pack. For kicks, i went downstairs to measure both my sla packs that have been fully charged just over a week ago and they measure 26.0 volts for a 24 volt...
  17. G

    box for ping battery ?

    lol. gotta give u a thumbs up for the copious use of duct tape to match the battery :)
  18. G

    box for ping battery ?

    wow -- just wow! I have the very same vintage toolbox in the same color I inherited from my dad. Gary
  19. G

    Ping 48V15Ah WTF

    I did the same - ordered the case via REI online and had them deliver to my local store. My local store also did not have any onhand. I found that amazon had a similiar (probably manufactured by same company) case for $30.15...
  20. G

    Ping 48V15Ah WTF

    Yes it is a bit odd. I got home a few hrs ago and noticed the same cell is still blinking. It's been almost 24 hrs now and that's the only led blinking right now. I'm not going to worry about it, but it does make me wonder what's going on with that cell.
  21. G

    Ping 48V15Ah WTF

    My battery pack is used off ebay. Got it from someone who bought it end of last year. So what is the bms doing after you disconnect the charger? Is it not balancing? If not, what would that process be called? Dancing? :) Gary
  22. G

    Ping 48V15Ah WTF

    Those are excellent prices on the connectors. With shipping, I was able to get them for about $3/ea with the prongs. You can get some good deals on ebay. I also ordered a 16T southpaw freewheel so I can get some much needed speed. Look fwd to that shipment. Gary
  23. G

    Ping 48V15Ah WTF

    That's good to hear, but why, when charging the battery, this cell (or should i say LED) and the one next to it is the last one to reach solid state? It takes longer to charge and balance that cell? When you unplug the charger from the battery, the dancing of the LEDs seems to be centered...
  24. G

    Ping 48V15Ah WTF

    This is a good thread. After unplugging the charger, it took some time before the bms lights to start dancing. LED in the middle (3 and 4) started to blink first. THey were the ones that took the longest to reach a solid led state when charging. About 2 hrs later the led's started to dance...
  25. G

    Ping 48V15Ah WTF

    So I just unplugged my charger (just disconnected the xlr connector) after 3-4 hrs of being plugged in after the pack was fully charged ( all the LED's turned on ). My BMS lights are still on. When will the lights start dancing and when will the led's finally turn off?
Back
Top