Search results

Date Relevance Most replies

  1. S

    new cyclone 3000 w mid-drive kit?

    From one of your yt videos (bike) it looks like you are using this setup: from motor to the outer sprocket, then the two inner sprockets are used with derailer to the rear cassette. Is this correct?
  2. S

    new cyclone 3000 w mid-drive kit?

    Might not be easy to understand what I am after here, but basically, if you have the triple chainring; are you guys running the setup from the motor sprocket to the inner, middle or outer chainring? Edit: I have the 44/48/32T chainring. Also the "new style" motor mounts from Cyclone.
  3. S

    new cyclone 3000 w mid-drive kit?

    Some more pictures of the installment; The motor plate is quite far out on the other side: But pedals clears on both sides of the motor
  4. S

    new cyclone 3000 w mid-drive kit?

    Chain line! So I have come this far with the innstall I have 3 chain rings that come with the kit. As you can see from the picture the outer sprocket aligns quite well with the sprocket from the motor. But I thought that the small sprocket from the motor should go to the inner small sprocket...
  5. S

    new cyclone 3000 w mid-drive kit?

    Hi, is there a big difference from the kit direct from Cyclone vs Luna cycle kit ? Seems like the Luna cycle is out of stock so I am tempted to get it direct from factory.
  6. S

    Kepler Friction drive comes of age.

    Hi, did you set the max Erpm limit to max 60,000 in the BLDC software ? I use a Vesc on my Esk8 and before we startet to limit this setting it was a common fault to fry the DRV if you did not set this limit.
  7. S

    Yuneec E-Go Rebuild and Upgrade!

    How did you cut the cf plate? And how thick is it ?
  8. S

    Q100 Hubmotor problem

    Wow, did not know about this cruise control :oops: Will try to disconnect asap. Many thanks for your help, as I said the got kart is running perfect now. It is faster and tops out at about 30 kmh. The motor and new controller is barely warm, great combo :D
  9. S

    Noobs first micro kart

    Thanks, Yeah a 3 wheeled 1RWD should work fine and be simple to make. The one I built has drive on only one wheel, but works well and is of course more stable and safe. For my kids that is quite important :D
  10. S

    Q100 Hubmotor problem

    Got the go kart up and running with the Elifebike controller, it works perfect except for one odd issue! Sometimes the throttle gets stuck at wide open, so when I let it go back to zero throttle it is still at wide open. To fix this I just snap the throttle one ore twice fast and it stops but...
  11. S

    Noobs first micro kart

    I built this go kart for my kids, it is powered with a Q100 hub motor and now does about 30 km/h max speed. https://www.youtube.com/watch?v=O9Gm7Raem10 Of course this is not an ultra light micro kart, but if you change the wood for alu profiles it would be quite close :) I actually started...
  12. S

    Offroad Onda with integrated electronics

    Super nice, Are you using existing cavities in the board for the battery or have you carved them out ourself ?
  13. S

    Q100 Hubmotor problem

    KU93 will not clock fast enough for Q100(high pole count, compound gears). BMS Battery does not offer a good match for you application, unless you want to go with the large S12SH and cut one shunt. 9-FET Elifebike controller has perfect LVC's for both 10S and 12S. It is the one you want. Trust...
  14. S

    Q100 Hubmotor problem

    Thanks for you're replay. I am running Lipo battery 10S and 12S, good tip about filing the shunt if I get it running correct as I do think it would be a bit high without this mod. But if you see the video it is shutting of at max throttle. The problem is at both 36V and 48V, I also did a check...
  15. S

    Q100 Hubmotor problem

    Thanks for your replay. I agree that the load is quite high and force the controller to run max amps and may causing it to overheat. The motor however is not warm at all. But what you are saying that is that the KU93 is not compatible with the Q100 ? I can get a new controller but I would...
  16. S

    Q100 Hubmotor problem

    I made a go kart for the kids using this kit Q100 24V250W-350W Front E-Bike Kit with LED Meter - RPM : 201 It worked fine but was a bit to slow at 24V so I used 36V battery instead, now the speed was okay but the controller got really hot. So I ordered aKU93 450W 9Mosfets High Speed Controller...
  17. S

    ZBoard 2

    ZBoard just released a new version of the ZBoard. https://www.youtube.com/watch?v=Cl2ViN4zJA8 Really like the led ring at the nose of the board as an battery indicator and the footpads .
  18. S

    Bafang BBSxx - fault finding and fixes

    Hi Savvas, I was actually thinking the same as you regarding renaming the thread. There is so much good info in the main BBS thread, but quite hard to find as it is closing up on 100 pages fast! So I will change topic like suggested and we can post bug fixes here. As to my drive I need more...
  19. S

    Bafang BBSxx - fault finding and fixes

    Thanks for all the replays, much appreciated. From the video that you posted teslanv it seems that we have quite similar noise. Can somebody please post a video of a motor with normal noise without chain ? Some questions to teslanv and Kepler : Did the motor you have come with this noise from...
  20. S

    Bafang BBSxx - fault finding and fixes

    Hello, I just finished installling a new Bafang BBS02 750W kit, and when testing it I think it makes a strange pulsating clanking sound from motor or gear. See attached video http://www.youtube.com/watch?v=dxGLE6lLAls&list=HL1397298109 Is this "normal" noise and am I being way to critical or...
  21. S

    New Bafang Crank-Drives

    Ordered my 750W kit 24 feb. and I finally got it today! Package and everything in it is in perfect condition so I am a happy camper now! Looking foreward to converting my front wheel hub to mid drive, as I have quite a lot of hills where I live.
  22. S

    New Bafang Crank-Drives

    Thanks, that is reassuring to know. The last I heard was "that it will be ready in a few days", and it is now over one week since I got that replay. But I guess I am a little spoiled with short leadtime from other vendors, I ordered some prototypes for work that was cnc machined, laser cut and...
  23. S

    New Bafang Crank-Drives

    I ordered my 750W kit from General Electronics Battery one month ago, and it is still not shipped! Is this normal? I have no trouble with waiting a couple of weeks but one month is a looong time. Response time on email from amy is also slow. Hope you guys had better experience with General...
  24. S

    RC throttle interface build tutorial........

    Super, thank you so much :D Just got some more snow here now so testing the Stiga Snowblaster soon.
  25. S

    RC throttle interface build tutorial........

    Like this ?
Back
Top