scriewy
100 W
lol that is the best, who ever can manage a job like that or find some 1 that can.
5404/5403 The good The bad The ugly
- Thread starter Evoforce
- Start date
NeilP
1 GW
NeilP
1 GW
Home made axle
see my thread here for more details
http://endless-sphere.com/forums/viewtopic.php?f=3&t=40785&start=75
see my thread here for more details
http://endless-sphere.com/forums/viewtopic.php?f=3&t=40785&start=75
NeilP
1 GW
What? a 54xx? Not unless someone sells theirs, as you may or may not know they were a special order
Next bedt is 5304 ?, try Ed Lyen
http://www.lyen.com/
Or go one better and get the Cromotor from Methods
http://www.methtek.com/category/motors/
Next bedt is 5304 ?, try Ed Lyen
http://www.lyen.com/
Or go one better and get the Cromotor from Methods
http://www.methtek.com/category/motors/
ohzee
100 kW
Check this out from ebikes.ca
M5403RD26 Rear 26 inch 5403 with Disk Side Cover $695.00 USD
In Stock: 9
M5403RD26 Rear 26 inch 5403 with Disk Side Cover $695.00 USD
In Stock: 9
Doctorbass
100 GW
Excellent new!!
Doc
ohzee
100 kW
Just got confirmation from Justin that these are the same as the group buy.
He also stated there would be more details posted about it by EOW.
I should have asked if it would was a limited amount or if he'd continue to get stock of them. Like to know that.
ninja edit meant EOW not EOY lol
He also stated there would be more details posted about it by EOW.
I should have asked if it would was a limited amount or if he'd continue to get stock of them. Like to know that.
ninja edit meant EOW not EOY lol
ohzee
100 kW
So hooking up my 5404 to one of cell_man's new 24 fet controllers he sells. It's solid and looks like the other 24 fet's I have seen.
Actually opened up the end last night and peeked inside - traces seem pretty beefy and it's rated for 90 amps and 80 something volts I think.
Anyway about to start doing my favorite dance and that's the phase wire / hall combo one.
I know the lyen to crystalyte combo's so I think i am going to just go with that.. doing some searching so far not able to find anything
definitive as most people in the past use cell_man's controllers with mac/bms or mxus motors supplied by him.
Worked it out - just looks like standard crystalyte-infenion colors.
Actually opened up the end last night and peeked inside - traces seem pretty beefy and it's rated for 90 amps and 80 something volts I think.
Anyway about to start doing my favorite dance and that's the phase wire / hall combo one.
I know the lyen to crystalyte combo's so I think i am going to just go with that.. doing some searching so far not able to find anything
definitive as most people in the past use cell_man's controllers with mac/bms or mxus motors supplied by him.
Worked it out - just looks like standard crystalyte-infenion colors.
Similar threads
- Question
