chuyskywalker
1 kW
So, what I do know:
What all my searching is failing to dig up is how you can use a separate throttle (lever, cable-operated-throttle, whatever-hall/pod sensor you've got) along with the CA for dedicated proportional regen. Is it just as simple as pulling the +5/GND/Blue wire out of the PR throttle bundle and leaving the PR's direct throttle alone?
- If you use the Phaserunner directly, you can pull apart the 3pin jst throttle wire, expose the blue wire and have two separate throttles for acceleration and one for proportional regen.
- If you have a Cycle Analyst, you can trigger progressive regen by setting things up in the PhaseRunner to recognize 0.8->0.0 as min->max regn and then use the CA to send that value while the ebrake is engaged, modulating it through the regular throttle.
What all my searching is failing to dig up is how you can use a separate throttle (lever, cable-operated-throttle, whatever-hall/pod sensor you've got) along with the CA for dedicated proportional regen. Is it just as simple as pulling the +5/GND/Blue wire out of the PR throttle bundle and leaving the PR's direct throttle alone?