bsconz
1 µW
- Joined
- Feb 18, 2022
- Messages
- 4
UPDATED 3/13/22: Sold more items. Reduced prices AGAIN on remaining items.
I bought an entire EV motorcycle project from a local guy who never finished it. He bought everything new and just didn't complete the project but changed my mind.
All the items for sale and were purchased brand new in 2012 and are still in excellent to like-new condition...none of these components were ever actually used! Some parts show slight signs of age and being handled from when the previous owner was planning his build and starting to mount stuff or move things around his shop. These parts were all purchased new around 2012 and sitting in the previous owner's shop since then. Most of the original boxes are long gone but I had no trouble finding info, support files, s/w, etc. online.
Send me a PM with offers. I'm in Tucson, AZ if you want to see anything locally. Happy to work out payment and ship anywhere!
Prices are OBO but consider that I will send PayPal requests and pay fee's on the transaction so there's buyer protection. Additionally, everything will be properly packaged but insured for the value since there are sensitive electronics.
elithion Lithiumate Lite BMS $250: brand new in 2012 and never used, comes with 3 positive end, 3 negative end, and 21 mid-cell boards, breakout module, USB cable, LEM current sensor), I set this system up with the batteries to see if I could recovery and charge them. The BMS is 100% functional and pretty slick. NOTE: I installed this system on the battery pack and tested it out. Had to cut the push connectors off so some wiring will be required to connect the cell boards together.
Sevcon 72V to 12V DC-DC converter $100: brand new in 2012, was installed on project frame for location but never even connected.
Gigavac GX15BA 200A contactor with 12V solenoid $50: brand new in 2012, was installed on project frame for location but never even connected. Comes with the resitor and diode too.
SW200 Contactor $20: I believe this is a 72V solenoid driven 200A contactor, same story, brand new never used.
Sprocket Specialists custom 68T rear sprocket $35: 7075-T6 structural aluminum, made for a 1985 Honda VF500 rear wheel but i will measure the bolt circle and other pertinent dimension and update this post, it probably fits a crapload of Honda's. Center diameter = 80mm Bolt Circle= 5x110mm NOTE: it's up to you to figure out if this fits your application or not.
I bought an entire EV motorcycle project from a local guy who never finished it. He bought everything new and just didn't complete the project but changed my mind.
All the items for sale and were purchased brand new in 2012 and are still in excellent to like-new condition...none of these components were ever actually used! Some parts show slight signs of age and being handled from when the previous owner was planning his build and starting to mount stuff or move things around his shop. These parts were all purchased new around 2012 and sitting in the previous owner's shop since then. Most of the original boxes are long gone but I had no trouble finding info, support files, s/w, etc. online.
Send me a PM with offers. I'm in Tucson, AZ if you want to see anything locally. Happy to work out payment and ship anywhere!
Prices are OBO but consider that I will send PayPal requests and pay fee's on the transaction so there's buyer protection. Additionally, everything will be properly packaged but insured for the value since there are sensitive electronics.
elithion Lithiumate Lite BMS $250: brand new in 2012 and never used, comes with 3 positive end, 3 negative end, and 21 mid-cell boards, breakout module, USB cable, LEM current sensor), I set this system up with the batteries to see if I could recovery and charge them. The BMS is 100% functional and pretty slick. NOTE: I installed this system on the battery pack and tested it out. Had to cut the push connectors off so some wiring will be required to connect the cell boards together.
Sevcon 72V to 12V DC-DC converter $100: brand new in 2012, was installed on project frame for location but never even connected.
Gigavac GX15BA 200A contactor with 12V solenoid $50: brand new in 2012, was installed on project frame for location but never even connected. Comes with the resitor and diode too.
SW200 Contactor $20: I believe this is a 72V solenoid driven 200A contactor, same story, brand new never used.
Sprocket Specialists custom 68T rear sprocket $35: 7075-T6 structural aluminum, made for a 1985 Honda VF500 rear wheel but i will measure the bolt circle and other pertinent dimension and update this post, it probably fits a crapload of Honda's. Center diameter = 80mm Bolt Circle= 5x110mm NOTE: it's up to you to figure out if this fits your application or not.
