Pedrohlt
10 mW
I'm thinking about making a E-MTB with:
-2x 5065 270kV sensored motors (https://goo.gl/G0ZmFk)
-2x FVT 80A 6S sensored ESC (https://goo.gl/PSk2oW)
-3x 6S 5000mAh LiPO for 22.2v 15Ah
-Gearing for 25mph
My idea is to run at about 1200W max on each motor, to avoid overheating. With the 80A esc, the max cont power would be about 1800W. Can I limit the max power by programming the esc?
This setup will be very cheap (USD 182 for motors and esc) and light (435g each motor), but my concern is about overheating.
What do you guys think? Can those 5065 motors handle 1200W continuous?
-2x 5065 270kV sensored motors (https://goo.gl/G0ZmFk)
-2x FVT 80A 6S sensored ESC (https://goo.gl/PSk2oW)
-3x 6S 5000mAh LiPO for 22.2v 15Ah
-Gearing for 25mph
My idea is to run at about 1200W max on each motor, to avoid overheating. With the 80A esc, the max cont power would be about 1800W. Can I limit the max power by programming the esc?
This setup will be very cheap (USD 182 for motors and esc) and light (435g each motor), but my concern is about overheating.
What do you guys think? Can those 5065 motors handle 1200W continuous?