Theodore Voltaire
1 GW
Turbomatic said:
Thank you for reaching out to me Turbomatic. I double checked my spam folder and found the reply I was I was waiting for. Looks like my pre order is in the queue. This is good news.
E-S Stealth Electric Bike Owners
- Thread starter voicecoils
- Start date
Thank you for reaching out to me Turbomatic. I double checked my spam folder and found the reply I was I was waiting for. Looks like my pre order is in the queue. This is good news.
Theodore Voltaire
1 GW
uh oh, I think I many have blew out one of my halls playing around with my diagnostic tool. Is that even possible? All I know is one of my halls seems bad now. The first time I checked them the other day, all the halls checked good, but now one of them checks bad. The controller still checks bad, same as before.
I may have shorted one of the hall signal wires to 5v. Suspiciously the one that now test bad is the black wire, which is in between the positive, and minus, probably the easiest one for me to short.
I may have shorted one of the hall signal wires to 5v. Suspiciously the one that now test bad is the black wire, which is in between the positive, and minus, probably the easiest one for me to short.
Rix
100 TW
Theodore Voltaire said:
Can't you like rig it with some streamers and get it running? :wink:
Theodore Voltaire
1 GW
Rix said:
I wish, but no, my streamer technology only works for cloaking. When I get my bike running again I'll probably need longer streamers.
Theodore Voltaire
1 GW
I'm trying to buy one of these motors, but he seller seems reluctant to sell me one because they're afraid it won't fit my bike. Its for 150mm drop outs, but it says the axle is 225mm, which should be able to work, don't you think?
https://www.amazon.com/gp/product/B086GP9VZV/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B086GP9VZV/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1
Theodore Voltaire
1 GW
Theodore Voltaire said:
Since everyone is in agreement, I told them to ship it.
Allex
100 MW
Theodore Voltaire said:
https://endless-sphere.com/forums/viewtopic.php?f=6&t=62650&start=225#p1165502
Theodore Voltaire
1 GW
Allex said:
Thank you so much Alex, this is exactly what I need to see. You're the best.
Theodore Voltaire
1 GW
I actually made 3 posts in that thread, but I forgot about Bigbore installing a QS 205.
Theodore Voltaire
1 GW
This is the plug from the Kelly controller that works the throttle which uses 4,20, and 3.
My question is what does 8 do? It doesn't appear anywhere on the wiring diagram.
My question is what does 8 do? It doesn't appear anywhere on the wiring diagram.
Rix
100 TW
1abv said:
If you are unlike me and have hair, it may stand up. All good though. I bet you felt charged after that ride.
Rix
100 TW
Theodore Voltaire said:
Do some research, it may be an ebrake sensor or PAS wire of something like that.
Rix
100 TW
Our dropouts are 162mm just get some 10mm X 14mm spacers and it will be fine.Theodore Voltaire said:
Rix
100 TW
:lol: :lol:Theodore Voltaire said:
Theodore Voltaire
1 GW
Rix said:
Thanks Rix, 162 is even less than I thought. That should make it a piece of cake.
Rix
100 TW
and you got a little wiggle room for perfect chain alignment or disk brake alignment.Theodore Voltaire said:
Rix
100 TW
Be careful, crack can kill, and if you die face down you are crack up.
Theodore Voltaire
1 GW
1abv said:
Are those gold nuggets on the ground, or am I on crack?
Theodore Voltaire
1 GW
1abv, I've been studying up on connecting a Kelly controller to a ca, these are my thoughts. The Kelly controller renders the ca kind of redundunt for a lot of it's features. The ca will really only be useful as a speedo/odo/trip meter, a volt meter, and checking your current, and ah used. All the connection points to hook it up will already be located up inside the frame, except the hall wire. The hall wire is the only wire that will need to be run from the controller to the ca. I wouldn't want the ca to be able to overide the Kelly, so I don't see any reason to hook the throttle to the ca. In my case since I already have what now days they call a eco mode switch, I guess I might run one more wire from the controller to activate it, even though I never use it. I'm not planning to hook up the regen automtic axle bolt unscrewer either.
Here's a link for a shunt that's not to enormus. I'm thinking 150 amp, 50mv
http://www.cshunt.com/pdf/la.pdf
Here's a link for a shunt that's not to enormus. I'm thinking 150 amp, 50mv
http://www.cshunt.com/pdf/la.pdf
Thats why I would like to try and find another solution not involving the CA at all so no shunt needed ideally.. I only use the CA for
speed trip odo volt current ah usage anyway. So if I can find a display that would do that w/o a shunt then im all good. Seeing as how onyx has a display w/o a shunt im wondering if that display would work.. but really ive been riding too much to move quickly with it. I extended part of the wiring harness to work. Still have to build the battery extension and breaker.
speed trip odo volt current ah usage anyway. So if I can find a display that would do that w/o a shunt then im all good. Seeing as how onyx has a display w/o a shunt im wondering if that display would work.. but really ive been riding too much to move quickly with it. I extended part of the wiring harness to work. Still have to build the battery extension and breaker.
