ScooterMan101 said:I would love to get a report on what speed , and how long it can ride the ... Tail of the Dragon ( Deals Gap )
That is a road that is on my Bucket List , and I want to do it on a e-bike at speeds , well you know what I am talking about.
Jonno said:....getting bored with mine so I've treated it to a Cromotor V3
Dump the 72v ncr18650pf pack
Add 20s4p lipos @ 20.8 ah 10/20c discharge rate
.....and lastly don brave pants
hufstuf said:Another great vid Andy. If you're gonna be riding off-road you definitely need to get some knobbies on there. My bike is coming with the Evelbike Grizzly on the front which I believe to be the Duro Wildlife Leopard (I'm getting the 24" front wheel) and I'll be installing the Duro DM1155 (19") on the rear. My main use will be off-road.
Bike should be here next week [I hope I hope I hope ; )]
joe81 said:what is your experience riding the 24" bicycle front and 19" moto rear mix?
is the front really still larger in diameter than the rear?
I'm considering road tires of the same dimensions, but guess the rear will be quite stiff vs the bicycle tire.
quadfather said:hello people!
haven't checked in for a while. life has been busy for the last few months.......
my e-bike has a serious problem and i CANNOT fix it.
it all powers up fine but will not move.
ive tried a new controller, a new throttle, new switches still to no avail. i suspected the motor. so i metered it out and all seems fine. (quote)
truth is his Endurobike is still dead, lasted less than 1000 miles ???
Mikey_Builds said:Guys I have a few questions:
(1) Is it better to buy from some suppliers over others?
(2) Is the LeiLi 5000w hub anything good (the they sell on endurobikes website?
(3) Have you all been able to get the moto seat from endurobikes? They show it in an image but it is not listed.
(4) Is there 72v controller (LLS-01 Low Brake 72v Sinewave Electric Bike Controller) any good or should I go to another brand?
(5) I would like to buy most of my parts from LeiLi (endurobikes site) but I want to know if they are quality.
(6) Do I have to get the red hardware that closes the plastic door to the frame??? What standard are those bolts so that I can replace them with something black!!!
Thanks