appleseed123
1 W
So i got my hs3540 motor and infineon 40 amp from ebikes working and rode it for 2 days. I was fixing the rear brake and i guess i didnt fully tighten the axle nuts and the wires got twisted. Time to fix something.
So i the controller turns the CA on but when i hit the throttle no power is sent to the motor and no noise or anything. So i test the hall sensors with the controller on. the red wire was 5.5 volts, black ground, and all the other hall sensor wires were higher voltage (6.4 volts) regardless of spinning the wheel.
Could someone help me narrow this down to either the controller or halls sensor.
BTW, i was in the process of buying torque arms, and its a steel dropouts so i thought i would be safe for 1 week, oh well good time to learn more about the motor
Thanks guys
edit: added controller type
So i the controller turns the CA on but when i hit the throttle no power is sent to the motor and no noise or anything. So i test the hall sensors with the controller on. the red wire was 5.5 volts, black ground, and all the other hall sensor wires were higher voltage (6.4 volts) regardless of spinning the wheel.
Could someone help me narrow this down to either the controller or halls sensor.
BTW, i was in the process of buying torque arms, and its a steel dropouts so i thought i would be safe for 1 week, oh well good time to learn more about the motor
Thanks guys
edit: added controller type