controller for PMSM wiring help

Hammer247

1 µW
Joined
May 4, 2024
Messages
1
Location
ontario, canada
can someone PLEASE help me or point me in the right direction??

i bought an electric motorcycle about 1 1/2yrs ago. i used it a couple times and i never got it going again (dont remember why). i used some parts off it and last summer, i ripped the wiring out. both the controller and harness have been altered.

i'm looking for a wiring diagram so i can hook it up (properly, i hope).

i know the motor/hall sensor/phase/battery wires

im pretty sure the CUT red and black wires were for the charging port.

the red connector (orange/blue/green) was maybe connected to an alarm?

blue/black/yellow wire connector?

13-pin connector?
 

Attachments

  • IMG_0536.jpg
    IMG_0536.jpg
    25.3 KB · Views: 1
  • IMG_0519.jpg
    IMG_0519.jpg
    2.2 MB · Views: 1
  • IMG_0535.jpg
    IMG_0535.jpg
    2 MB · Views: 0
  • IMG_0522.jpg
    IMG_0522.jpg
    1.7 MB · Views: 0
  • IMG_0526.jpg
    IMG_0526.jpg
    2.7 MB · Views: 0
  • IMG_0527.jpg
    IMG_0527.jpg
    667.1 KB · Views: 0
  • IMG_0531.jpg
    IMG_0531.jpg
    850.6 KB · Views: 0
  • IMG_0534.jpg
    IMG_0534.jpg
    46.7 KB · Views: 1
Back
Top