The KP058 arrived and appears to have the right diameters and lengths to be the right part.
I also bought some jb weld with the idea that i will fill in the grooves cut into the rear swingarm.
However, given that the disc brake side of the swingarm is where the damage is, i feel that i can never trust it to be as sturdy as stock.
What i would like to do with this bike is have a 22" rear and 20" front.. and run dual hub motors.. a 28mm wide DD in the rear and a geared motor up front that's wound for 3/4ths the speed, and the only use of the front hub would be to assist in climbing hills.
The bike now has to be sent off to a shop to have the new headset installed.
I also bought some jb weld with the idea that i will fill in the grooves cut into the rear swingarm.
However, given that the disc brake side of the swingarm is where the damage is, i feel that i can never trust it to be as sturdy as stock.
What i would like to do with this bike is have a 22" rear and 20" front.. and run dual hub motors.. a 28mm wide DD in the rear and a geared motor up front that's wound for 3/4ths the speed, and the only use of the front hub would be to assist in climbing hills.
The bike now has to be sent off to a shop to have the new headset installed.