Hey, I need support.
Bicycle:
Indiana E-MTB 1.0 LCD c300s (Bigstone manufacturer).
Controller:
LSW943-209F WZK0209
The original harness has 3 pins, i.e. 2x brake and LCD.
According to the label, the controller has the option of adding a throttle.
1 wire in the controller is not connected to anything, which goes to the steering wheel harness. This cable is used in the harness that has 4 pins.
And so I ordered a throttle.
I connected it as I thought, so the gray one is the impulse from the throttle, plus from the brake and minus, the same.
On my Indiana LCD, the wheel rotates at a maximum of 7 km, so there must be a blockage in the LCD that cannot be removed. Entering mode 12 does not allow you to change the settings.
On another LCD, the same model (C300s) but no longer with the Indiana logo, when I press the gas there is a maximum reaction, i.e. let's say 25-30 km, but... on the LCD I have 0 km and it displays error 9, i.e. there is no communication between the LCD and the controller.
Does this mean a damaged LCD?
The old one works as above.
Bicycle:
Indiana E-MTB 1.0 LCD c300s (Bigstone manufacturer).
Controller:
LSW943-209F WZK0209
The original harness has 3 pins, i.e. 2x brake and LCD.
According to the label, the controller has the option of adding a throttle.
1 wire in the controller is not connected to anything, which goes to the steering wheel harness. This cable is used in the harness that has 4 pins.
And so I ordered a throttle.
I connected it as I thought, so the gray one is the impulse from the throttle, plus from the brake and minus, the same.
On my Indiana LCD, the wheel rotates at a maximum of 7 km, so there must be a blockage in the LCD that cannot be removed. Entering mode 12 does not allow you to change the settings.
On another LCD, the same model (C300s) but no longer with the Indiana logo, when I press the gas there is a maximum reaction, i.e. let's say 25-30 km, but... on the LCD I have 0 km and it displays error 9, i.e. there is no communication between the LCD and the controller.
Does this mean a damaged LCD?
The old one works as above.