After setting up a KLS7230S controller, and attaching it to the control box and tablet, I get pedel error anytime I engage the throttle and the motor does not move.
I have used this same Bafang BBSHD motor with an ASI BAC800 as well as a stock controller, and it does spin.
What does pedel error mean? Where do you start with pedel error? I read the documentation and the word "pedel error" or pedal error do not show up, so I do not know what to make of this error.
I have 57v hooked up to + and - of the controller, 12v hooked up to the control box, and the hall sensor wires run from the BBSHD motor core to the Kelly controller using a harness/connector I ripped off of another controller.
Also: when I try to utilize the Windows PC software, it says "read error" anytime I try to run it without anything else. I have installed the drivers for the USB to RS232 adapter as well as unplugged every other USB to RS232/serial device from the machine. I can use this same machine to "program" the stock BBSHD controller, but with this one, it gives "read error" each time.
Has anyone else ever had these issues with this or similar model Kelly Controllers? Do you have any suggestions as to where to start here?
Thank you!
I have used this same Bafang BBSHD motor with an ASI BAC800 as well as a stock controller, and it does spin.
What does pedel error mean? Where do you start with pedel error? I read the documentation and the word "pedel error" or pedal error do not show up, so I do not know what to make of this error.
I have 57v hooked up to + and - of the controller, 12v hooked up to the control box, and the hall sensor wires run from the BBSHD motor core to the Kelly controller using a harness/connector I ripped off of another controller.
Also: when I try to utilize the Windows PC software, it says "read error" anytime I try to run it without anything else. I have installed the drivers for the USB to RS232 adapter as well as unplugged every other USB to RS232/serial device from the machine. I can use this same machine to "program" the stock BBSHD controller, but with this one, it gives "read error" each time.
Has anyone else ever had these issues with this or similar model Kelly Controllers? Do you have any suggestions as to where to start here?
Thank you!