I've seen much conversions where people say that use 48 or more volts and 30 or more amps. Talking to an electrician about the Bafang Bpm 500w/48v motor cable (3 x 1.5 mm) to support those current he said that it won't support 15 amp, max 10 amp. In that case i can't use my 48v/15 amp battery. But if I think to change the cable to 3 x 2.5 mm as he sugested it won't pass through the hole in the dropout axis of the rear motor or the hole in the side of the axis in the front motor. The cable from factory has 6 mm and a cable with 3x2.5 has 9 mm. How can I make to use my 48v/15 amp battery without loosing power and without problems?
Thanks in advance
Thanks in advance