DTBAKER61
1 mW
so.... trying to help out a buddy that has an 'older' eBike w 3-wire 48v hub motor... controller/display died after 6 years, so we ordered a new pair of matching KT controller/display, with PAS only, no throttle which was how he's used to riding; turn out the new controller is a 9-wire 'sensor-ed' type.
I am wondering if there is a wiring harness I can buy, or a schematic I can follow, to wire in what the Controller needs for the 6-wire sensor input in addition to the normal 3-wire that I have from the old motor?
What is the controller 6-wire plug expecting? Can I re-wire to feed it correct voltages to 'think' it has sensors working so the PAS will kick in once pedalling?
I am wondering if there is a wiring harness I can buy, or a schematic I can follow, to wire in what the Controller needs for the 6-wire sensor input in addition to the normal 3-wire that I have from the old motor?
What is the controller 6-wire plug expecting? Can I re-wire to feed it correct voltages to 'think' it has sensors working so the PAS will kick in once pedalling?