I have the 7kW Bluetooth Powervelocity controller:
http://powervelocity.com/home/48-18f-ebike-sinewavesilent-controller-android-ios-bluetooth-programmable-8kw.html
It's currently installed on my bike, running at 52V. I've tried a couple of phones, that will connect via Bluetooth, but the app will not read or write to the controller settings. Although the controller has an input voltage range of 36V-100V, it's running fine on 52V, without the ability to adjust the hi or lo voltage cutoffs, etc.
I bought this controller specifically so that I could run/test different voltage levels and the ability to make changes to field weakening and regen parameters. Like I mentioned, it's running fine at 52V, but now I'm concerned that if I can't solve the Bluetooth issue, that I'd run into problems using 60V or 72V, since I can't adjust those parameters.
Some controllers with auto-sense voltage and set the main cutoff values accordingly. I'm wondering if the PV controller has that type of firmware. It would still be a bummer to not be able to adjust the other parameters, but at least I'd be able to run the other voltages, and adjust what I can via the Cycle Analyst.
http://powervelocity.com/home/48-18f-ebike-sinewavesilent-controller-android-ios-bluetooth-programmable-8kw.html
It's currently installed on my bike, running at 52V. I've tried a couple of phones, that will connect via Bluetooth, but the app will not read or write to the controller settings. Although the controller has an input voltage range of 36V-100V, it's running fine on 52V, without the ability to adjust the hi or lo voltage cutoffs, etc.
I bought this controller specifically so that I could run/test different voltage levels and the ability to make changes to field weakening and regen parameters. Like I mentioned, it's running fine at 52V, but now I'm concerned that if I can't solve the Bluetooth issue, that I'd run into problems using 60V or 72V, since I can't adjust those parameters.
Some controllers with auto-sense voltage and set the main cutoff values accordingly. I'm wondering if the PV controller has that type of firmware. It would still be a bummer to not be able to adjust the other parameters, but at least I'd be able to run the other voltages, and adjust what I can via the Cycle Analyst.