Single Chip BMS Research + DALY Pin Compatible BMS's

Ok well
LHT is stamped on the mating connector
The connector is 17 pins
It is a replacement of a replacement of a replicant

Datasheet calls out only up to 16pin

YEONHO SMH200-NN
Calls out replacing the above

Why am I finishing this? I will never specify this garbage.

-methods
 
FINAL ANSWER

This is the OEM of the cable whip housing, LHE
https://www.lhecn.com/

They have a couple that look close, but the website is out of date. It is a 2.0mm connector

You can poke around the 2005, 2006 area for a match
https://www.lhecn.com/a2006/

pause

-methods
 
2006 are only dual row

2007 look different

Down selecting to
* Wire to Board
* 2mm pitch

You get only 2 pages
https://www.lhecn.com/category/wire-to-board/2-0mm-pitch/
https://www.lhecn.com/category/wire-to-board/2-0mm-pitch/page/2/

From those you find only the 2005, with a perfect visual match

https://www.lhecn.com/a2005/
Housing is in a "Natural" but those come in
* White
* Black
* Natural

So you never reject based on that
The only thing I can not solve is that they claim to only go up to 16P

-methods
 
AKA

"PHB Connector"

Where the only error could be the assumption on wire pitch*

-methods
 
So the pn would be

Other.png

A2005-H17 PHB-17Y

Found here
https://www.lhecn.com/files/basic-html/page58.html

Other.png
There it is

-methods
 
yes

This exact connector
https://www.lhecn.com/a2005/

Is now available in 17pin
And that is what you find on the DALY whips

F A C T

-methods
 
You must log in or register to reply here.
Back
Top