johnekaes said:velotric truckrun hub motor wiring
johnekaes said:the pics were posted not to help me but to help others. The velotric motor (truckrun) uses a non-standard connector.
johnekaes said:the pics were posted not to help me but to help others. The velotric motor (truckrun) uses a non-standard connector.
this is all I could get from the motor manufact.Unfortunately, there's no wiring in your documents. The docx file only says "I have a velotric bike with your controller that is only working in speed mode, not torque mode. I need torquie mode. Can you help. It's possible that there is a need for 100 of these. (email address removed)" which you could have just put as text in your post.
The PDF is just a mechanical drawing of a motor.
If you post actual pictures of the wiring on all of your actual devices, both new and old, showing where they went originally, and where they go now, plus all of the wiring diagrams and all other information about the old system and the new parts that you have, we might be able to help figure things out, if there is enough information. Links to the sale pages for each item are often helpful as they often have information you may not know that you need.
Note that just pictures of wires or connectors (without showing where they come from and go to) won't help us help you (but a lot of people just post such out-of-context pics).
We may have to have you connect some things and measure voltages, etc. to help make sure things get connected to the right wires, since most of the time the connectors and wire colors, etc dont' match between new and old stuff.
coontack Myles @ AffordableEbikes.ca he made an adapter from the odd connector on the motor to a kt controller. He also sold me the controller and display and harness and a pas with the right connector on it. I made an adapter for the tail light and bought a cheap headlight from walmart. I also bought some cheap brake levers with 3 wire connectors to match up with the kt. I t runs like a rad power now with simulated torque. BTW if you have the early discovery bikes then check to see if the front brake adapter is correct as they put the wrong one on my bike and the front brake failed. this is the wiring diagramYou still haven't actually posted anything.
coontack Myles @ AffordableEbikes.ca he made an adapter from the odd connector on the motor to a kt controller. He also sold me the controller and display and harness and a pas with the right connector on it. I made an adapter for the tail light and bought a cheap headlight from walmart. I also bought some cheap brake levers with 3 wire connectors to match up with the kt. I t runs like a rad power now with simulated torque. BTW if you have the early discovery bikes then check to see if the front brake adapter is correct as they put the wrong one on my bike and the front brake failed. this is the wiring diagram