cali_ebikes
1 µW
I have a dual motor ebike that is supposed to be 1000watt each motor, I decided to replace the original controllers which were 25amp controllers, I purchased two 26amp sine wave controllers 13/26. I have never been able to go faster than about 28mph even though the ads claimed it could do 35mph. These new sine wave controller makes the bike a lot quicker off the line and the response is much quicker than the original controllers, but the top speed is about the same possibly even slower by 1 or 2mph. Now while playing with the new display settings, the max amps was set to 12 by default, and it's adjustable to 20. I have two batteries serving each motor separately on different throttles and displays, each battery is capable of 50amp max discharge. So my question is what is the max amps I can set each controller to if they are 13/26 sine wave controllers? Can I set each one to the max the display allows at 20ampas, or would this be creating a peak amps of 40? Not sure how this settings works when dealing with dual mode vs sine wave controllers. Anybody?