herbalizer404 said:Ok thank you striker. Maybe i can find adapters on the market.
Hi Herbalizer.herbalizer404 said:Im the owner artur is talking about
I will receive a total of lifepo4 4sx6=24s
so 13.2Vx6=79.2V 8400mah and 30c (40c burst)
Do you know how much A will it really brings? And how many watts finally?
I'm notre sure about my calculation. Thanks
You are right, it says 13.2V I could have sworn LiFePO cells were 3.2V nominal. So if the discharge rate is accurate, you could pull 8.4x30=252A (8.4x40=336A burst)herbalizer404 said:OK thx. Here is one of the six pack
Dirtech said:You are right, it says 13.2V I could have sworn LiFePO cells were 3.2V nominal. So if the discharge rate is accurate, you could pull 8.4x30=252A (8.4x40=336A burst)herbalizer404 said:OK thx. Here is one of the six pack
Realistically I think your controller will limit you in terms of current. Even the Max-E has max battery current of 140A.
You could add another 24s in parallel to double the current you can draw and achieve 16.8Ah capacity. But even if striker is right and the batteries are only good for a quarter of as advertised, this is still 63A (84A burst).striker54 said:Dirtech said:You are right, it says 13.2V I could have sworn LiFePO cells were 3.2V nominal. So if the discharge rate is accurate, you could pull 8.4x30=252A (8.4x40=336A burst)herbalizer404 said:OK thx. Here is one of the six pack
Realistically I think your controller will limit you in terms of current. Even the Max-E has max battery current of 140A.
If the Life cells from hobbyking are like the Lipo cells also from hobbyking you need to de-rate the C capacity by 4 at least. So the 30C will be more 7.5C really.
Also only 8.4Ah will be good only for 20-30km of autonomy. The ideal will be the double or triple of that capacity.Dirtech said:You could add another 24s in parallel to double the current you can draw and achieve 16.8Ah capacity.).
63A is good for a MINI-EDirtech said:But even if striker is right and the batteries are only good for a quarter of as advertised, this is still 63A (84A burst).
herbalizer404 said:I will check the wheelbase tonight. I putted the chain this morning.
Unfortunately my rear brake doesn't fit between the motor and the disc.
Anyone had this problem? Thanks