MyPC8MyBrain
100 mW
- Joined
- Jan 20, 2008
- Messages
- 48
So Phillip at GoldenMotors has said that he is sorry for not replacing my blown 48v regen controller sooner and will be sending a new style regen controller set. Maybe he's trying be better after the last email i sent.
Anybody seen one of these before ? First time I've seen something like this.
To view on the website go here http://www.goldenmotor.com/and click on "Controllers"
Magic! ... It can drive your ebike even with failed motor hall sensors, throttle, breaker, or all of them failed together!
wiring diagram:
http://www.goldenmotor.com/e-Bike-DIY/Cruise Controller Wiring Diagram.pdf
drawing:
http://www.goldenmotor.com/e-Bike-DIY/Cruise%20BLDC%20Controller%20Drawing.pdf
Special Features:
Cruise Speed Control
Regenerative Braking
Anti-theft alarm and wheel-locking by detection of vehicle vibration
Hall sensor failure redundency (Automatically switch to sensorless control)
Other failures redundency (Work with failed throttle and power breaker)
You can force it to work with lower voltages (e.g 48V to 36V, 36V to 24V)
Report failure components by beeps
Motor phase self detection and calibration
Support Forward and Reverse
Excessive Current Protection
Low Voltage Protection
High Reliability
Available for 24V,36V and 48V brushless motors
Anybody seen one of these before ? First time I've seen something like this.
To view on the website go here http://www.goldenmotor.com/and click on "Controllers"
Magic! ... It can drive your ebike even with failed motor hall sensors, throttle, breaker, or all of them failed together!
wiring diagram:
http://www.goldenmotor.com/e-Bike-DIY/Cruise Controller Wiring Diagram.pdf
drawing:
http://www.goldenmotor.com/e-Bike-DIY/Cruise%20BLDC%20Controller%20Drawing.pdf
Special Features:
Cruise Speed Control
Regenerative Braking
Anti-theft alarm and wheel-locking by detection of vehicle vibration
Hall sensor failure redundency (Automatically switch to sensorless control)
Other failures redundency (Work with failed throttle and power breaker)
You can force it to work with lower voltages (e.g 48V to 36V, 36V to 24V)
Report failure components by beeps
Motor phase self detection and calibration
Support Forward and Reverse
Excessive Current Protection
Low Voltage Protection
High Reliability
Available for 24V,36V and 48V brushless motors