Paulflieg said:
very good, I can confirm everything so far, for em150 FW 2.33! Unfortunately, with FW2.23, the important (torque control) is not that simple. But at least a good step forward ...
Yes, i have Firmware 2.33 and i have torque (current) limits for low and mid. But it seems Firmware 2.32 doesn’t. I wonder if there is a way to change the firmware to the useful version, lol.
I will keep testing to see if i can find why my busbar current setting does nothing. Maybe i need to check auto enabler and set 10 seconds on and 30 seconds recovery and see if that makes it shift from sports mode current to busbar current.
I can only guess that the timer would start when you exceed busbar setting and after the time limit it throttles you down to busbar limit for the cooldown period, then enables again for next time you want sport mode.
This would help prevent you from frying your motor but still allows the short burst of power most motors can tolerate if given adequate cooldown interval.