carlos1984
100 µW
- Joined
- Sep 24, 2021
- Messages
- 7
HI everyone I have this Yukon Trail Xplorer XF26, it is a 36v rear motor drive, it needs a new battery , not a problem, but the main problem I am havinf is the display is damaged, missing the cover and some leds, also think it is water damaged.
So I started loking online for a replacement but the connectors are different, the connector on the original display is a circular with 5 pins around a center pin, total of 6 pins, it also has a cutout making hte connector look like a capital D. See pics.
The manual calls the display a 790 led, which I was able to find online but it comes with differernt connectors.
Also if I am going to be replacing the dispaly I was thinking of upgrading it to a better one but again cannot find one with that style connector.
Is there a way of figuring the wiring pinout and splicing in a new display?
So I started loking online for a replacement but the connectors are different, the connector on the original display is a circular with 5 pins around a center pin, total of 6 pins, it also has a cutout making hte connector look like a capital D. See pics.
The manual calls the display a 790 led, which I was able to find online but it comes with differernt connectors.
Also if I am going to be replacing the dispaly I was thinking of upgrading it to a better one but again cannot find one with that style connector.
Is there a way of figuring the wiring pinout and splicing in a new display?