Rix
100 TW
kmes_2000 said:Hi guys
I ran my fighter with the cycle analyst disconnected. It ran better than when the cycle analyst was working I got full power back.
Will it damage my fighter if I run it with the cycle analyst disconnected? It accelerates and goes faster with the ca unplugged.
I brought the bike to grin yday and they gave me a free sync cable and were very helpful. now Im waiting on the custom stealth cycle analyst firmware to be e-mailed to me.
I can't use the stock firmware found on their website because it won't have the correct parameters.
I post again when I flash the firmware.
Yah, you can ride it around disconnected, but the problem is you don't know how much current you are using. Even though the battery has a BMS that shuts things down to prevent over discharge, you want to avoid BMS shut down as well. That said, if you got a way of tracking distance, then figure you got 26KM @ WOT on flat hard ground and around 40KM pedal assisting and taking it easy. In reality you got more than that, but these guidelines are erroring on the side of caution.