thank you I will try your settings
Here you go, hope it helps. I know that hackey messed with dead time compensation and the transition to sensorless.
I dont remember what else unfortunately.
thank you I will try your settings
Here you go, hope it helps. I know that hackey messed with dead time compensation and the transition to sensorless.
I dont remember what else unfortunately.
What's the model number of the BT module? Got any pics?yes I have the pinout from the controller. But the bluetooth dongle has no pinout to be found. just 4 wire comming out. Also I have the older version cl700 so it does not has the blug already made like in this manual. I shearched wih the bluetooth model number and still did not find pinout. the dongle is from 3shul.
Red is +ve (it'll be fine up to at least 5 or 6 volts), Black is -ve, Green is TX, Yellow is RX.Here are pictures of the Bluetooth dongle if someone know the pin out?View attachment 347686
He said he was out of office this week and coming back next week. And I am waiting on a reply from ennoid to see if his new bms he just released will work with my slave board.Dont you get any replys at all from Hackey?
In my experiance he usually is very quick to answer questions that dont involve work from him. (even on evenings or weekends)
Not so much when he needs to do something, or when the answer is no, it is not finished or similar.
Be very careful of Far-driver. I've just had the worst experience dealing with them directly.Well hackey reply’s to my message but it take always 2 to 3 days and always partial answer. But yeah I need a new controller my only option looks to be 3shul or fardriver
I am pretty sure the controller was deffective. I would get motor resistance different every time I would do the motor detection. sometimes normal value and sometimes 900mohm etcWhat blew the controller? You having the earlier version model, I wonder if it’s potted?
I am pretty sure the controller was deffective. I would get motor resistance different every time I would do the motor detection. sometimes normal value and sometimes 900mohm etc
Still no reply from hackey. This build is becoming a pain in the ass with all the defective parts
When I bought my controller there was only the cl1000 an 700 available and the cl1000 was too big to fit. And the spec hackey told me were higher than the final advertised spec for the cl700. If I ever get a reply I will get the cl1400. I message him on messenger he is alwas online but never read my messages.Sorry to hear about the defective parts! I can certainly see how frustrating that can be. I think we’re all excited to see your bike up and running, you’ve done a great job with this build.
And to be fair, I think your existing controller is too small anyway. That CL1400 would be better match with that QS180 ️️️
Are you texting Hackey through WhatsApp?